Expert Answers about ATV Hitch
- Does Curt ATV Ball Mount C45009 Have a Towing Weight or Class Rating
- The Curt ATV Ball Mount # C45009 does not have a specific towing weight rating, nor a class rating, because its capacity will exceed that of virtually any ATV and ATV hitch. The Polaris Rangers vary in their towing capacity depending on the specific model. The XP900 is indeed rated for 2000-lbs, but the model 570 is rated for 1500-lbs and the XP1000 is rated for 2500-lbs. This ball mount is fine for use with any of these since it will have a higher capacity than the hitch and the ATV itself.
view full answer... - Can Reese Towpower ATV Hitch be Used in the Drop Position
- The Reese Towpower ATV Hitch, part # RP7065000, measures 3/8 of an inch thick except for the D-ring. The D-ring is a 1/2 inch thick.
The hitch can be used in the dop position. I went out and looked at it and there's plenty of room for a hitch ball to not interfere with the D-ring.
view full answer... - Size of Anchor Bolt on Curt ATV Ball Mount Adapter with Welded D-Ring
- The anchor bolt that installs the Curt ATV Ball Mount Adapter # C45006 onto an ATV hitch is a 3/4 inch x 10. I spoke with my contact at Curt and confirmed the size of the bolt for you.
view full answer... - What Hitch Cargo Carrier With A Ramp Do You Offer That Is 48 W X 72 L
- We do offer many hitch cargo carriers with ramps, but none 48" wide. The widest cargo carrier with a ramp we offer is the 32x48 Reese Steel Solo Cargo Carrier and Folding Ramp for 2" Hitches - 400 lbs, part # PS10401-10402. This carrier is 32" wide and the length with the ramp included is 96". It has a 2" hitch and a weight capacity of 400 lbs. It is fairly heavy at 101 lbs.
If you have a pickup truck you can go with something like the Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps...
view full answer... - Diameter of the Holes on Reese Towpower 3 way ATV Hitch RP7065000
- For the Reese Towpower 3-Way ATV Hitch # RP7065000 that you referenced is has 3/4 inch inner hole and 5/8 outer hole.
view full answer... - Platform Dimensions for Reese Towpower 3-Way ATV Hitch
- The Reese Towpower 3-Way ATV Hitch # RP7065000 measures 2" at two of the holes and then 2-5/8" at the middle one. I've attached a photo for you to reference.
view full answer... - Length of Curt C45005 3 In 1 ATV Ball Mount
- The overall length of the Curt # C45005 3 in 1 ball mount for 2 inch ATV hitches is 11-1/4 inches, and the center of the hitch pin hole to center of the 1-7/8 icnh trailer ball is exactly 6 inches, as shown in the provided photo.
I've linked to a product demonstration video featuring the # C45005 ball mount.
view full answer... - Dimensions of Curt Ball Mount for ATV Hitches 45009
- For the Curt Ball Mount for 2" ATV Hitches - 2" Ball and Clevis Bar - 1/4" Rise # C45009 I've attached a video that assists with the dimensions. It will be 6 inches from the center of the hitch pin hole to the center of the ball. It is 2-1/2 from that hole to the back of the shank. From the weld to the center of the hitch pin hole is 3-1/4 inches so from that point to the back of the shank is 5-3/4 inches.
view full answer... - Distance from Clevis hole to End of Ball Mount on Curt ATV Ball Mount
- I've attached a diagram to show some other helpful measurements for the Curt Ball Mount for 2" ATV Hitches # C45009 . The measurement from the center of the clevis hole to the end of the hitch is approximately 10"; it is approximately 7-1/2" from the center of the clevis hole to the center of the hitch pin and approximately 2-1/2" from the center of the hitch pin to the end of the ball mount. It is also 6" from the center of the hitch pin to the center of the ball mount.
view full answer... - Can a 2008 Nissan Rogue be Used to Tow a 600 lb Honda Rubicon ATV on a Trailer
- When I looked up the owner's manual for your 2008 Nissan Rogue it said on page 9-20 that your vehicle has a max trailer weight rating of 1,500 lbs with manual mode or 1,000 lbs without manual mode. Either way your max tongue weight rating is 150 lbs.
For a trailer hitch I recommend the etrailer.com Trailer Hitch Receiver # E98846 which is a Class III hitch with a 2" receiver and is rated for 3,500 lbs max trailer weight and 525 lb tongue weight. Since these are over the ratings for your...
view full answer... - Hitch Adapter to Allow Towing and Use of Hitch Motorcycle Carrier for Honda Trail 90
- You may be able to both tow an ATV trailer and simultaneously use a motorcycle carrier in a hitch adapter like the Curt # D-192 but you will want to confirm the weight capacities of your Navion and the hitch installed on it. Check the RV owner's manual and also the safety sticker on your hitch to confirm weight ratings. Both the RV and the hitch on it must be rated for the combined weight of the Trail 90, the carrier you use to transport it and the actual tongue weight of the loaded utility...
view full answer... - Is the etrailer Motorcycle Carrier Adjustable Along the Shank and How Much Clearance Does it Provide
- It sounds like you have an ATV in your 2014 Ram 1500's bed that requires the tailgate to be down, and you want to use the etrailer Motorcycle Carrier, part # e98873, to carry a motorcycle at the same time. If that's not the case, let me know and I will amend this answer.
The etrailer Motorcycle Carrier doesn't move along the shank per se. Instead, it has three hitch pin hole locations to accommodate different clearance requirements. From the center of the first hitch pin hole to the closest...
view full answer... - Weight Capacity of Curt RV Hitch for Pulling a Trailer
- The Curt RV Hitch # 13703 has a maximum weight capacity of 3,500 pounds. Regardless of how wide the trailer frame it is on is.
view full answer... - Reciever Hitch for my 2020 Somerset E3 Deck Pop Up Camper.
- The Curt Adjustable Width Trailer Hitch Receiver for part # 13703 is rated for 350 lbs. of toungue weight and 3500 lbs. of gross trailer weight. In your situation you would be well below the stated maximums and using the bolts to install the hitch to your frame would be perfectly acceptable.
Of course please check with your camper's manufacturer to ensure that your camper is rated for towing once you have found that you do not want to exceed the lowest weight rating of the camper, hitch...
view full answer... - Aftermarket Class V Hitch for 2017 Ford F-250
- If your bumper-pull toy hauler trailer has a tongue weight (TW) of 1400-lbs without your vehicles loaded (but with full water and propane tanks) usually the TW after you load ATVs will remain pretty much the same or potentially drop slightly. This depends on the weight and specific placement of the load relative to the axle. Two very heavy ATVs placed far to the rear of the trailer's garage area could tend to lift the tongue slightly, reducing TW a little.
Just the same, since you are...
view full answer... - Does Curt Trailer Hitch for 2016 Honda Accord Have Enough Capacity for ATV Trailer
- The Curt trailer hitch part # C11681 that you referenced has a 2,000 lb trailer weight capacity which means it would easily handle the weight of a 1,100 lb total trailer. Now I looked up the towing capacity of your 2016 Honda Accord which is rated separately from the hitch and it is only rated for towing up to 1,054 lbs so hopefully the weights you mentioned were overestimated.
view full answer... - Does Hidden Hitch 80232 Reduce Towing Capacity
- You do not lose any towing capacity when you use the Hidden Hitch Ball Mount # 80232 despite it's longer length of 15 inches.
view full answer... - Interior Width of DeeZee Specialty Series ATV Toolbox
- The DeeZee Specialty Series ATV Toolbox # DZM207 is 35" long x 12" wide x 12-1/2" tall, and the height does not take the lid into account. The interior dimensions of the toolbox will be the same, minus roughly 1/8". If you let me know the year, make and model of your truck I may be able to find something that works for you.
view full answer... - Actual Length of Titan Hitch Box Extension for 2-1/2 Inch Receivers Part # RP45018
- The 48 inch maximum length mentioned in the product description represents the distance from the furthest hitch pin hole on the vehicle side of the extender and the hitch pin hole on the other end.
The distance from the hitch pin hole where the extension would attach to the receiver on your truck to the front face of the receiver on the extension is 50 inches.
I have edited a photo showing what the 48 inch measurement represents.
view full answer... - Dimensions of Bulldog Winch Mount for 2016 Kawasaki Teryx
- I reached out to a representative of Bulldog who said the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15176 measured approximately 9 inches wide, 7-1/2 inches deep and 3-3/4 inches high (to the bottom of the mounting plate).
You can use these measurements to determine if this winch will fit over the hitch on your 2016 Teryx. If so you can use this mount for a winch like the 4,000 lbs Powersports Series # BDW15004 or 6,000 lbs Compact Series # BDW15022.
I have added links to video...
view full answer...
Go To Results